+86-021-51602012

KITO Uni-directional in-line detonation flame arrester

KITO Uni-directional in-line detonation flame arrester

 

Products advantages

 

For installation into pipes to protect containers and components against stable detonation of flammable liquids and gases. Tested and approved as detonation flame arrester type 4. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Working unidirectional in pipes, whereby an operating pressure of 1.2 bar abs. and an maximum operating temperature of 60 °C must not be exceeded. Provided with one temperature sensor (PT 100) the armature is certified against short time burning from one side. The installation is not dependent on the position and both directions of flow are possible. During installation,please observe the direction of detonation and the indication protected side.

 

 

Technical specifications

 

   

Housing / valve seat edge

cast steel 1.0619, cast steel 1.4408

Max. working Pressure

1.2 barg

Max. working Temperature

60 °C

MESG

MESG> 0.9 mm.

Nominal Diameter

DN 25 - DN 100 | 1" - 4"

Temperature sensor

Optionally£¨PT 100, connection 3/8“, 1.4571£©

Flange connection

EN 1092-1 Typ type B1, ASME B16.5 Class 150 RF, API standard 650 (optionally)

   

 

Industries

 

 

n  Chemical

n  Oil&Gas

n  Petrochemical

n  Energy

n  Technical Gases

n  LNG&LPG

n  Pharmaceutical

n  Food&Beverage

n  Ship Building

n  Heating & Air conditioning system

n  General industries

 

2018 Shanghai Xingxiang Industrial Equipment Co., Ltd Copyright ±¸°¸ºÅ£º»¦ICP±¸18017479ºÅ-1